Products
Victor Paint
Add: No.12 Deneng West road, Torch development area, Zhongshan city, Guangdong, China
Tel: +86-760-22211707
Fax: +86-760-23698558
E-mail: meshwork@1377.cc
Tel: +86-760-22211707
Fax: +86-760-23698558
E-mail: meshwork@1377.cc
You can search according to the following combined conditions
Name : Victor Premium Exterior Wall Finish (VT9000)
Victor premium exterior wall finish is a kind of environment-friendly, water base exterior walls decorative coating, which can provide an excellent hiding power, superior dirt resistant and good resistance to washing and weathering performance.
Features:
1. Strong adhesion
2. Dirt resistance
3. Good weather resistance
4. Matte finish
Applied to: Exterior Wall.
Technical Index:
1.Alkali Resistance(72 hours): no change
2. Water resistance (72 hours): no change
3. Ageing-resistant time: >300h
4. Dirt Resistance: whiteness decline rate<15% (5 cycles)
Thinner: Clean water
Dilution Ratio: no more than 15% of the total
Theoretical coverage: 10-12 m2/kg/coat (depending on the substrate conditions)
Dry time (at 25℃):
-To touch: 1 hour
-For Recoating: 2-3 hours
Color: white or specified color
Packing: 20kg/18L
Shelf Life: 18 months in sealed cans
Toxicity: No added lead or mercury
Painting environment: application temperature 5-40 degrees, relative humidity is less than 85%.
Application method: Brush, Roller, and Spray
Clean up: Clean all equipment with clean water immediately after use
Storage:
1. Store in cool, dry and good ventilated place, with lid tightly closed. Temperature range: 5℃-40℃.
2. Keep out of reach of children and away from food, drink and animal feed.
Surface preparation:
1. Remove all loose or powdery paint residue by brushing and scraping with a stiff fiber brush
2. Fill any minor cracks with an appropriate sealer
3. Surface should be flat, smooth and free of dust, grease and other contaminants
4. The new cement mortar wall should be maintained at least 14 days before the application of the putty
Notes for use:
1. Stir thoroughly before use, if too sticky, add water to adjust.
2. Surface drying time should be appropriate extension in high humidity regions as well as lower temperature condition.
3. Stop application when temperature is below 10℃, or humidity over 85%.
4. Apply with Victor matching topcoates for best performance.
5. After application, thinned paint should not be poured back to the original can.
6. The same color must be used up at one time, otherwise it would cause chromatic aberration.
Features:
1. Strong adhesion
2. Dirt resistance
3. Good weather resistance
4. Matte finish
Applied to: Exterior Wall.
Technical Index:
1.Alkali Resistance(72 hours): no change
2. Water resistance (72 hours): no change
3. Ageing-resistant time: >300h
4. Dirt Resistance: whiteness decline rate<15% (5 cycles)
Thinner: Clean water
Dilution Ratio: no more than 15% of the total
Theoretical coverage: 10-12 m2/kg/coat (depending on the substrate conditions)
Dry time (at 25℃):
-To touch: 1 hour
-For Recoating: 2-3 hours
Color: white or specified color
Packing: 20kg/18L
Shelf Life: 18 months in sealed cans
Toxicity: No added lead or mercury
Painting environment: application temperature 5-40 degrees, relative humidity is less than 85%.
Application method: Brush, Roller, and Spray
Clean up: Clean all equipment with clean water immediately after use
Storage:
1. Store in cool, dry and good ventilated place, with lid tightly closed. Temperature range: 5℃-40℃.
2. Keep out of reach of children and away from food, drink and animal feed.
Surface preparation:
1. Remove all loose or powdery paint residue by brushing and scraping with a stiff fiber brush
2. Fill any minor cracks with an appropriate sealer
3. Surface should be flat, smooth and free of dust, grease and other contaminants
4. The new cement mortar wall should be maintained at least 14 days before the application of the putty
Notes for use:
1. Stir thoroughly before use, if too sticky, add water to adjust.
2. Surface drying time should be appropriate extension in high humidity regions as well as lower temperature condition.
3. Stop application when temperature is below 10℃, or humidity over 85%.
4. Apply with Victor matching topcoates for best performance.
5. After application, thinned paint should not be poured back to the original can.
6. The same color must be used up at one time, otherwise it would cause chromatic aberration.